24v dc relay

[r6sporty]

   
Hi, can anyone tell me if i can use an output channel on a DC controller to switch a 24VDC relay to bring on some 240v floods please??
Thanks

[Craig]

Yes you can. It was discussed previously on another thread
https://www.syncrolight.co.uk/forum/show...ight=Relay

Also we now have a 3 channel relay controller available on the website
https://www.syncrolight.co.uk/ProductDet...-RL03.aspx

Craig

[r6sporty]

great, thanks for that.
don't suppose you have a picture of the 3 channel relay controller do you?3 Channel Relay Controller

[r6sporty]

Craig, you spoke in the previous post about needing a diode.Do your relay controllers cOne with diodes or will I need to get these?
Thanks

[Craig]

(09-10-2020, 07:27 AM)r6sporty Wrote: Craig, you spoke in the previous post about needing a diode.Do your relay controllers cOne with diodes or will I need to get these?
Thanks

Yes the Relay controller has flyback diodes installed on the PCB. The controller just needs a 12v DC power supply to power the PCB.
Photos are on the website now.

[Pauls]

oh like the look of this new controller, will have to get this next year to replace mine that I made using a 3 channel dc controller and relays as per the previous thread. will give me another controller to use then for a RGB strip as well then.