Syncrolight Forum

[attachment=77]
Hi, can anyone tell me if i can use an output channel on a DC controller to switch a 24VDC relay to bring on some 240v floods please??
Thanks

Yes you can. It was discussed previously on another thread
https://www.syncrolight.co.uk/forum/show...ight=Relay

Also we now have a 3 channel relay controller available on the website
https://www.syncrolight.co.uk/ProductDet...-RL03.aspx

Craig

great, thanks for that.
don't suppose you have a picture of the 3 channel relay controller do you?3 Channel Relay Controller

Craig, you spoke in the previous post about needing a diode.Do your relay controllers cOne with diodes or will I need to get these?
Thanks

(09-10-2020, 07:27 AM)r6sporty Wrote: [ -> ]Craig, you spoke in the previous post about needing a diode.Do your relay controllers cOne with diodes or will I need to get these?
Thanks

Yes the Relay controller has flyback diodes installed on the PCB. The controller just needs a 12v DC power supply to power the PCB.
Photos are on the website now.

oh like the look of this new controller, will have to get this next year to replace mine that I made using a 3 channel dc controller and relays as per the previous thread. will give me another controller to use then for a RGB strip as well then.