18-10-2021, 08:39 AM
Hi Phil,
At the top of the Show Designer, on the Home ribbon menu, there is a "Control Lights" switch. Turn that to "ON" to send live output from the Show Designer to the lights.
You would also need to ensure you have created a network in the Configuration editor of the Show Designer. Open the Configuration editor (next to the control lights) and ensure you have "Syncrolight(Ethernet)" listed under networks. If not use the "Add network" button to create the network. You assign the network a name when its created typically "net1", "net2" etc. and in the configuration of your pixel item ensure its assigned to your created network.
Craig
At the top of the Show Designer, on the Home ribbon menu, there is a "Control Lights" switch. Turn that to "ON" to send live output from the Show Designer to the lights.
You would also need to ensure you have created a network in the Configuration editor of the Show Designer. Open the Configuration editor (next to the control lights) and ensure you have "Syncrolight(Ethernet)" listed under networks. If not use the "Add network" button to create the network. You assign the network a name when its created typically "net1", "net2" etc. and in the configuration of your pixel item ensure its assigned to your created network.
Craig