21-09-2020, 08:43 PM
Is it possible to use the small dome pixel lights with this controller? And if so how as the controller is 7 to 24v and the lights are 5v.
Pixel lights.
|
21-09-2020, 08:43 PM
Is it possible to use the small dome pixel lights with this controller? And if so how as the controller is 7 to 24v and the lights are 5v.
21-09-2020, 09:07 PM
Which controller are you looking at?
(21-09-2020, 09:07 PM)Jane Wrote: Which controller are you looking at? Sorry forgot to add the link. It's this one I have just ordered. https://www.syncrolight.co.uk/ProductDet...-CARD.aspx
21-09-2020, 10:36 PM
Yes the SD card controller does work with the small dome pixels.
22-09-2020, 05:34 AM
22-09-2020, 12:58 PM
(22-09-2020, 05:34 AM)Pauls Wrote:hi Paul if your refuring to these https://syncrolight.co.uk/ProductDetails...806-2.aspx(21-09-2020, 10:36 PM)Jane Wrote: Yes the SD card controller does work with the small dome pixels. then you should use a 5v power supply kind regards Jack
22-09-2020, 03:07 PM
(22-09-2020, 12:58 PM)grigg Wrote:(22-09-2020, 05:34 AM)Pauls Wrote:hi Paul if your refuring to these https://syncrolight.co.uk/ProductDetails...806-2.aspx(21-09-2020, 10:36 PM)Jane Wrote: Yes the SD card controller does work with the small dome pixels. Hi Jack many thanks, the controller was delivered today and it says in the manual that you can use 5 to 40 v on it, i was questioning it as the item details on the website say 7v. will have a play with it later when i get the show selector that i also received today working correctly.
22-09-2020, 04:35 PM
If the pixels are 5V then you should use a 5V power supply. You need to use the correct voltage for the pixels or you will damage them. The SD card controller works at 5v.
|
« Next Oldest | Next Newest »
|