Syncrolight Show Player

From £125.00
In Stock
Usually dispatched in 1-2 working days.
Options :
Quantity :

Product Details

The SP10B in an all-in-one light shows player that enables light shows to be run without a computer. It contains 10 built-in DC channels for connection to lights, along with a built in amplifier for sound output. Simply load your light shows onto the MicroSD card, connect your lights, power supply and a speaker and let it run your light show. The SP10B is fully compatible with all our other Syncrolight RS-485 based controllers (e.g. DC08, DC24, AC08 etc) so you can easily extend your display by adding more controllers for controlling additional lights. The built-in show player can run musical and non-musical light sequences either continually, at periodic intervals or on demand via an external pushbutton (not included). This controller can also be used in 'Slave' mode and used like other Syncrolight controllers from a computer. Built in 1W amplifier and line output for an external amplifier. Lights not included. Power supply not included (Please select a power supply suitable for your chosen lights). Speaker not included (8 Ohm speaker recommended). Not suitable for use with Pixels. If you are using pixels, please use our Pi Show player instead. A windows based computer and our software is required for creating/changing shows (Show Designer / Show Builder) and changing settings on this controller (Device Manager).

Features:

  • Built in 1 watt(mono) amplifier for direct speaker connection (Speaker not included)
  • Stereo Output for optional amplifier connection
  • 10 Channels (Outputs) for Connection to DC Lighting
  • Full Dimming support on all 10 Channels
  • Compatable with other Syncrolight Controllers
  • Syncrolight RS-485 output for connection to other controllers
  • External trigger Input and LED output
  • Suitable for use with all our DC LED lights
  • Built in ATO 5 Amp fuse (Can be upgraded upto 15 Amps)
  • Overheat, Overcurrent and Short Circuit Protection on each output
  • Reverse polarity protection (For PCB)
  • Transient voltage protection on RS485 connection
  • 2 Status LEDs
  • Each channel supports On, Off and Brightness control as well as Fade up/Fade down and flashing effects
  • Pluggable terminal block for easy connection.

Contents:

  • SP10B Controller
  • 1 GB Micro SDCard

Video:

Specifications:

SpecificationValue
Product Id:CTRL-SP10B
External Speaker Output:1 W, 8 Ohm
Max Recommended Current:3 Amps per channel / 15 Amps per controller
Audio Output:3.5mm stereo socket
Operating Voltage:5 to 30v DC
Dimmensions (approx):152mm x 70mm x 30mm
Approx Weight (KG):0.200