03-11-2017, 10:03 PM
(03-11-2017, 05:42 PM)Craig Wrote: Hi Daz,
If you have a 12v strip it will probably only be controllable in threes. The 5v ones are generally more expensive but you can control every single LED.
If the strip works with manual control through the Device Manager then you must have the Ethernet Controller configuration correct.
Double check that you have the Show Designer configuration correct. Also ensure that you close the Device Manager before starting the Show Designer, as only one application can have control of the Ethernet controller at a time.
Craig.
Hi Craig
After looking at everything again i found i had put a comer instead of a dot. Thanks for your help.
Just another questions. I want to get your rainbow star with controller and power.
I want this to be standalone. If i just power it up with a time clock will it start with the last sequence i have set it at?