PC and controller must be connected to your internet router or switch. Gateway can normally be blank or the ip address of your router. Subnet is 255.255.255.0. Your PC is probably set to use get an ip address from your router using dhcp. You need to manually set an static ip address temporarily.
Thread Rating:
Ethernet Pixel Controller Connection Issue
|
« Next Oldest | Next Newest »
|
Messages In This Thread |
Ethernet Pixel Controller Connection Issue - by Bullet1986 - 09-09-2017, 01:02 PM
RE: Ethernet Pixel Controller Connection Issue - by Craig - 09-09-2017, 05:26 PM
RE: Ethernet Pixel Controller Connection Issue - by Bullet1986 - 09-09-2017, 06:30 PM
RE: Ethernet Pixel Controller Connection Issue - by Craig - 09-09-2017, 07:33 PM
RE: Ethernet Pixel Controller Connection Issue - by Bullet1986 - 09-09-2017, 08:00 PM
RE: Ethernet Pixel Controller Connection Issue - by Craig - 09-09-2017, 08:37 PM
|
Users browsing this thread: 1 Guest(s)