21-12-2020, 03:05 PM
(03-12-2020, 10:56 PM)Craig Wrote: You can cut our standard light strings where the wires go to 2 wires (usually every 8 or 10 leds). If using large 5amp unregulated power supplies we recommend adding an additional resistor to the start of the string. We also recommend using brightness limiting function on the DC08 controller and set to the lowest level that provides an acceptable brightness. This will help limit the voltage and current to the leds to ensure the best led lifespan.
Hi Craig, thanks for this, what do i do with the 2 wires, isolate them both individually or join them together