Led String

[Nathanm114]

(13-11-2019, 11:56 PM)jack grigg Wrote:

(13-11-2019, 11:41 PM)Nathanm114 Wrote:

(13-11-2019, 11:06 PM)jack grigg Wrote:

(13-11-2019, 07:52 PM)Nathanm114 Wrote:

(13-11-2019, 06:29 PM)jack grigg Wrote: hi Nathan have you tried connecting each controller for each set of elements directly to the pc i would recommend trying this to rule out a problem somewhere else in your network also have you got the latest software v3.03.03 in this version it checks your configuration against the controllers configuration works for both ethernet and rs485 networks king regards jack

Hello,

Have tried this with no luck plus software is on the latest version.

When I test I prefer to do it one at a time.

Kind Regards

Nathan

hi nathan have you tried unplugging everything else from the controller and leaving just the eyes plugged in i had a few controllers last year that when all the outputs are in use it made the output before that go a little dimmer (e.g i had a white string on output 1 and a blue string on output 2 put when i plugged a string into output 3 both the previous outputs went dimmer) also what power supply are you using for the controller itself kind regards jack

Hello,

I haven’t tried that so I will look into that but in regards to power supply I bought it from syncrolight them self’s. Just read an update on the product page that has been added since the purchase of the power supply.

https://syncrolight.co.uk/ProductDetails...2A-SW.aspx


Kind Regards

Nathan

hi nathan, have you tried the 24v 5amp power supply  kind regards jack

Hello,

I haven’t tried it.

I have the transformer wired into a power distribution unit then goes off to each animation as I have 4 of them within my display plus a number of just strings within it as well.

In total I have 8 DC08 controllers running off this controller and it’s only the eye strings that never work.

Kind Regards

Nathan