13-11-2019, 06:29 PM
(13-11-2019, 07:58 AM)Nathanm114 Wrote: Hello,hi nathan have you tried connecting each controller for each set of elements directly to the pc i would recommend trying this to rule out a problem somewhere else in your network also have you got the latest software v3.03.03 in this version it checks your configuration against the controllers configuration works for both ethernet and rs485 networks king regards jack
I test in device manager and it’s also the same when I do run the show in the designer.
I set the eyes to 100% in the show.
All the controllers I am using are DC08’s.
Kind Regards
Nathan