30-11-2017, 09:16 AM
Hi Phil,
Try setting the mode to Slave rather than Auto to force the controller to be a slave device.
If you still have no joy, feel free to drop of the controller if you are passing and I'll give it a look over.
Note also that with the SD card you can run it on a separate network to get better performance for pixels. That way you can also increase the baud rate to 250000 also.
Craig.
Try setting the mode to Slave rather than Auto to force the controller to be a slave device.
If you still have no joy, feel free to drop of the controller if you are passing and I'll give it a look over.
Note also that with the SD card you can run it on a separate network to get better performance for pixels. That way you can also increase the baud rate to 250000 also.
Craig.