04-01-2018, 08:45 PM
(This post was last modified: 04-01-2018, 08:52 PM by krissprolls.)
(23-11-2017, 05:09 PM)krissprolls Wrote: Thanks for that
It's a good idea i'll test it quickly
Today, the new test led strip on my output 3 works well but she's short, directly connect on the controller with a 1 inch short cable. Besides, it doesn't need a supplementary power supply, the controller is enough.
The leds strips may be out of service or bad soldererd after the few first leds...
Thanks for all
After Christmas i would try test my controller with IC 2811 led strip in 12V power supply (3leds for 1 pixel).
Impossible to control the strips, they still stay on and white....
Do you have an upgrade for the firmware of the controller ?
Thanks Christopher (and Happy New year !)
I just do a test with my second ethernet controller, and the strips 2811 works well
Any idea ? the output of my first controller are dead ?