09-09-2017, 08:00 PM
(09-09-2017, 07:33 PM)Craig Wrote: PC and controller must be connected to your internet router or switch. Gateway can normally be blank or the ip address of your router. Subnet is 255.255.255.0. Your PC is probably set to use get an ip address from your router using dhcp. You need to manually set an static ip address temporarily.
OK,
I have connected my PC to the switch Via ethernet
I have connected controller to switch also with ethernet
Router is connected to switch as the input (bloke in PC world said that was what i had to do)
I have tried changing the IP address of my router but now reverted back to original settings
I have also tried changing IP address of PC, both LAN and wireless network - to match the controllers IP range. I have been using the following:
IP address 192.168.168.131
Network Mask 255.255.255.0
gateway - left blank (also tried using routers IP address)
Preferred DNS server 8.8.8.8
Alternate DNS 4.2.2.1
When i go on Ethernet device manager my list is blank.
On the controller itself i have a solid red light and a flashing green light and the yellow and green LEDs on the ethernet port are flashing (yellow is static)