19-08-2023, 10:13 PM
(19-08-2023, 08:11 PM)Craig Wrote: We provide the ready made faces with plug and play data cables. We also included a tail cable and 1m data extension cable also. If you have a USB-RS485 with bare wires, wire this to the data tail (A,B,GND wiring colours should be on the packet). You can then connect this data tail to one face. Then use the 1m plug and play cable to connect the other data cable on the 1st face to the 2nd face.
Craig
Thanks Craig, I got there in the end. Was definitely a mix of being eager, tired and hungry that confused me.