21-09-2021, 05:00 PM
What Controller do you have ?
If you have the ETH-08 Pixel controller, you can use the Device manager and create a virtual output on the controller that is mapped to the relevant pixels (i.e. Output 10 => Maps to Output 2 pixels 50 to 100).
If you have the SL-4000 or SL-8000 let me know and I will look for another solution as I don't think virtual outputs were implemented on those.
Craig.
If you have the ETH-08 Pixel controller, you can use the Device manager and create a virtual output on the controller that is mapped to the relevant pixels (i.e. Output 10 => Maps to Output 2 pixels 50 to 100).
If you have the SL-4000 or SL-8000 let me know and I will look for another solution as I don't think virtual outputs were implemented on those.
Craig.