04-11-2016, 09:43 PM
Hi
With my improved layout for xmas this year I thought I'd try you new show builder, and have tried the two free shows and very pleased with the results.
I have one item in my display which I have called "Fan", basically it is six strings fanning out from the top, each string has two sets of led lights. On my configurator I had set this a Item = Fan, segments = 6 and each segment with 2 channels. However when I built it in Show Builder (I didn't upload my design) I couldn't see how to add channels to each segment, so instead put 12 segments, this worked fine but I had to change my configurator and visualisation to reflect this. So my question is, is it possible to add more than one channel to a segment in show builder and if so how?
Phil
With my improved layout for xmas this year I thought I'd try you new show builder, and have tried the two free shows and very pleased with the results.
I have one item in my display which I have called "Fan", basically it is six strings fanning out from the top, each string has two sets of led lights. On my configurator I had set this a Item = Fan, segments = 6 and each segment with 2 channels. However when I built it in Show Builder (I didn't upload my design) I couldn't see how to add channels to each segment, so instead put 12 segments, this worked fine but I had to change my configurator and visualisation to reflect this. So my question is, is it possible to add more than one channel to a segment in show builder and if so how?
Phil