10-08-2021, 08:53 AM
The visualisation is generic as there are several ways of building the eyes (1) complete eyes only (only eyes open) flash the eyes to blink (2) seperate sections for eyes open and eyes closed ( blink is done by turning eyes open off and eyed closed on. (3) seperate eyes open and eyes closed, but the bottom line of lights (eyes closed) is used for both eyes open and eyes closed. (Blink is done by turning eyes open off and on, whilst leaving eyes closed on).
The visualisation contains seperate complete eye (eyes open) section and seperate eyes closed sections (type 2 above). If you want the visualisation to look correct, edit the lipsync settings (double click on a lipsync event and select the configuration tab). You will notice that the eyes open configuration is set to illuminate both eyes open and eyes closed (type 3 above), remove eyes closed, rebuild all events, and the visualisation will be correct. Depending on how you wire the segments, you may need to add this back when running with your built face.
The visualisation contains seperate complete eye (eyes open) section and seperate eyes closed sections (type 2 above). If you want the visualisation to look correct, edit the lipsync settings (double click on a lipsync event and select the configuration tab). You will notice that the eyes open configuration is set to illuminate both eyes open and eyes closed (type 3 above), remove eyes closed, rebuild all events, and the visualisation will be correct. Depending on how you wire the segments, you may need to add this back when running with your built face.