31-10-2016, 03:46 PM
(31-10-2016, 01:10 PM)ForumAdmin Wrote: For WS2812B, Set Pixel type to IC_2811 in the Ethernet controller configuration. Wire to the DAT output and not CLK, CLK is left empty.
Failing that it may be a bad strip. Be aware that there are lots of suppliers for these strips, some are made very cheaply and can be problematic.
All our Syncrolight strips and pixels are sourced from a professional manufacturer and are extensively tested with our controllers. If you have problems I suggest you try one of our strips.
It's work !! thanks !!