Posts: 4
Threads: 2
Joined: Jul 2020
Reputation:
0
Have a strange issue with show player
has 4 x 30 second and 1 x 2 min show on loop , all plays well , turns on as scheduled , but at end animation stops and last seq freezes and stays on all night
any help or pointers would be great
thanks
Posts: 41
Threads: 1
Joined: Jun 2017
Reputation:
0
(18-12-2020, 01:41 AM)shawnwales Wrote: Have a strange issue with show player
has 4 x 30 second and 1 x 2 min show on loop , all plays well , turns on as scheduled , but at end animation stops and last seq freezes and stays on all night
any help or pointers would be great
thanks
i have the same issue when using show player
there is a fix that works for me on every show increase it by 5-10 seconds but dont add any events (leave it blank)
that way the will turn off as will the lights
any issues let me know
kind regards
Jack
Posts: 4
Threads: 2
Joined: Jul 2020
Reputation:
0
18-12-2020, 05:19 PM
(This post was last modified: 18-12-2020, 05:20 PM by shawnwales.)
thanks Jack , that makes sense , i changed the order of the shows , which may be the main cause of the sudden issue ( the one i now have last may well be filled to the end and the prev end show was not )
cheers for the help
Posts: 4
Threads: 2
Joined: Jul 2020
Reputation:
0
(18-12-2020, 05:19 PM)shawnwales Wrote: thanks Jack , that makes sense , i changed the order of the shows , which may be the main cause of the sudden issue ( the one i now have last may well be filled to the end and the prev end show was not )
cheers for the help
Hi Jack
that didn't solve it , the problem is that show runner stops dead at 2300 and if its 1/2 way through a sequence , the sequence stops dead as well
I must admit i assumed it would run to the end of the sequence / show it was playing then turn off
Posts: 41
Threads: 1
Joined: Jun 2017
Reputation:
0
(19-12-2020, 12:30 AM)shawnwales Wrote: (18-12-2020, 05:19 PM)shawnwales Wrote: thanks Jack , that makes sense , i changed the order of the shows , which may be the main cause of the sudden issue ( the one i now have last may well be filled to the end and the prev end show was not )
cheers for the help
Hi Jack
that didn't solve it , the problem is that show runner stops dead at 2300 and if its 1/2 way through a sequence , the sequence stops dead as well
I must admit i assumed it would run to the end of the sequence / show it was playing then turn off
Hi
have you tried changing the time in which the schedule ends? try increasing it by 2-5 mins etc
what version of show player are you using?
the latest version is on the website (1st october 2020)
let me know
kind regards
jack
Posts: 36
Threads: 10
Joined: Sep 2016
Reputation:
0
(19-12-2020, 01:18 PM)grigg Wrote: (19-12-2020, 12:30 AM)shawnwales Wrote: (18-12-2020, 05:19 PM)shawnwales Wrote: thanks Jack , that makes sense , i changed the order of the shows , which may be the main cause of the sudden issue ( the one i now have last may well be filled to the end and the prev end show was not )
cheers for the help
Hi Jack
that didn't solve it , the problem is that show runner stops dead at 2300 and if its 1/2 way through a sequence , the sequence stops dead as well
I must admit i assumed it would run to the end of the sequence / show it was playing then turn off
Hi
have you tried changing the time in which the schedule ends? try increasing it by 2-5 mins etc
what version of show player are you using?
the latest version is on the website (1st october 2020)
let me know
kind regards
jack
I have the same issue, probably cause by the show lengh with the schedule stop before the show end.
Posts: 41
Threads: 1
Joined: Jun 2017
Reputation:
0
(20-12-2020, 10:50 AM)krissprolls Wrote: (19-12-2020, 01:18 PM)grigg Wrote: (19-12-2020, 12:30 AM)shawnwales Wrote: (18-12-2020, 05:19 PM)shawnwales Wrote: thanks Jack , that makes sense , i changed the order of the shows , which may be the main cause of the sudden issue ( the one i now have last may well be filled to the end and the prev end show was not )
cheers for the help
Hi Jack
that didn't solve it , the problem is that show runner stops dead at 2300 and if its 1/2 way through a sequence , the sequence stops dead as well
I must admit i assumed it would run to the end of the sequence / show it was playing then turn off
Hi
have you tried changing the time in which the schedule ends? try increasing it by 2-5 mins etc
what version of show player are you using?
the latest version is on the website (1st october 2020)
let me know
kind regards
jack
I have the same issue, probably cause by the show lengh with the schedule stop before the show end.
does it always stop on the same show?
Posts: 20
Threads: 6
Joined: Nov 2017
Reputation:
1
I've got this too... Wherever the show is at the schedule end time it will stop dead. I get round this by going into the ethernet device manager and start/stop the test pattern.
Only seem to have this issue with the ethernet controller, previous years with the DC controllers it would finish the show that was running at the end time.
Posts: 41
Threads: 1
Joined: Jun 2017
Reputation:
0
(20-12-2020, 11:54 PM)cymglo Wrote: I've got this too... Wherever the show is at the schedule end time it will stop dead. I get round this by going into the ethernet device manager and start/stop the test pattern.
Only seem to have this issue with the ethernet controller, previous years with the DC controllers it would finish the show that was running at the end time.
what mode do you have set in the scheduler? interactive,interval,manual or continuous?
Posts: 20
Threads: 6
Joined: Nov 2017
Reputation:
1
(21-12-2020, 12:00 AM)grigg Wrote: (20-12-2020, 11:54 PM)cymglo Wrote: I've got this too... Wherever the show is at the schedule end time it will stop dead. I get round this by going into the ethernet device manager and start/stop the test pattern.
Only seem to have this issue with the ethernet controller, previous years with the DC controllers it would finish the show that was running at the end time.
what mode do you have set in the scheduler? interactive,interval,manual or continuous?
Got it set to continuous - 5 shows total of 09:10
|