+- Syncrolight Forum (https://www.syncrolight.co.uk/forum)
+-- Forum: Light Shows (https://www.syncrolight.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: General (https://www.syncrolight.co.uk/forum/forumdisplay.php?fid=2)
+--- Thread: 32 channel bulk controller (/showthread.php?tid=53)
32 channel bulk controller - magical46 - 09-09-2017
Hi, I am hoping to build a "Quartet" of singing xmas trees, using the templates from Syncrolight which I have. For me cost is a big issue (I may not get all 4 done by this xmas), so to try and keep costs down a bit I was thinking of using the 32 channel bulk controller but have a couple of questions:-
Does this controller need just one power supply and if so what would you recommend for 4 trees?
Does it just require one device number on my network?
Finally do you supply a housing big enough to house it?
Thanks
Phil
RE: 32 channel bulk controller - Craig - 09-09-2017
The bulk pack is 4 seperate dc08 controllers. You can run all 4 from 1 power supply providing all lights dont exceed the power supply ampage. 2.5amp should be fine for 4 talking trees.
4 device ids are required, one for each controller.
You can easily fit 2 controllers in our large enclosure.