+- Syncrolight Forum (https://www.syncrolight.co.uk/forum)
+-- Forum: Light Shows (https://www.syncrolight.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: General (https://www.syncrolight.co.uk/forum/forumdisplay.php?fid=2)
+--- Thread: LED string - simple question (/showthread.php?tid=36)
LED string - simple question - TomP - 21-12-2016
Hi Everyone,
I'm just starting to get set for having a show for next year and ran into a little snag.
On the Syncrolight LED strings can I check the polarity of the connector, I havn't connected yet but was going to test all my DC controllers later and wanted to check before I hook up if the center pin is the +24V or GND.
Thanks for the help.
Tom
RE: LED string - simple question - sandy123 - 21-12-2016
(21-12-2016, 10:48 AM)TomP Wrote: Hi Everyone,Hi Tom
I'm just starting to get set for having a show for next year and ran into a little snag.
On the Syncrolight LED strings can I check the polarity of the connector, I havn't connected yet but was going to test all my DC controllers later and wanted to check before I hook up if the center pin is the +24V or GND.
Thanks for the help.
Tom
The centre pin on the supply leads are +ve
Regards
Sandy
RE: LED string - simple question - TomP - 21-12-2016
Hi Sandy,
Thanks for that, just didn't fancy watching the magic smoke appear