+- Syncrolight Forum (https://www.syncrolight.co.uk/forum)
+-- Forum: Light Shows (https://www.syncrolight.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: General (https://www.syncrolight.co.uk/forum/forumdisplay.php?fid=2)
+--- Thread: UV (/showthread.php?tid=252)
UV - Pawtrax - 13-07-2022
Any suggestions for uv lamps that could be used with syncrolight DC controllers and software?
RE: UV - Craig - 13-07-2022
Just a special type of light bulb. Usually 240v so best on an AC08 controller. Should work fine.
Craig
RE: UV - Pawtrax - 14-07-2022
(13-07-2022, 09:24 PM)Craig Wrote: Just a special type of light bulb. Usually 240v so best on an AC08 controller. Should work fine.
Craig
Nothing that will work on a DC08 controller?
RE: UV - Craig - 15-07-2022
If you can find a 12v or 24v DC bulb it would work. But ensure you use a regulated power supply to power controller and bulb.
Alternatively you could connect a relay to one of the outputs of the DC08, and use the relay to switch 240v to the bulb.
Craig