How to do outdoor wiring & connections - Printable Version +- Syncrolight Forum (https://www.syncrolight.co.uk/forum) +-- Forum: Light Shows (https://www.syncrolight.co.uk/forum/forumdisplay.php?fid=1) +--- Forum: General (https://www.syncrolight.co.uk/forum/forumdisplay.php?fid=2) +--- Thread: How to do outdoor wiring & connections (/showthread.php?tid=236) |
How to do outdoor wiring & connections - philspectrum - 27-11-2021 Hi, wanting to setup a few strings of PXL-2811-3 pixels, and wondering how to wire signal and 12v power & injectors to be weather proof? The pixel strings come with really short wires, - the signal can be daisy chained together, - so only need 1 long signal wire, plus multiple 12v wires. any tips or photos much appreciated. Thanks Phil RE: How to do outdoor wiring & connections - sandy123 - 27-11-2021 Hi I use Servisol Silicone Adhesive Sealant. Comes in 75ml tubes. It's a recognised 'Potting compound' and won't corrode any solder joints or copper tags. doesn't take much to give a good water tight seal on the end of strips Regards Sandy RE: How to do outdoor wiring & connections - Craig - 28-11-2021 We generally just use solder and heatshrink. The heatshrink with adhesive lining gives a good waterproof seal. When running signal wires, always use one core for a ground wire to minimise interference. Craig RE: How to do outdoor wiring & connections - philspectrum - 08-12-2021 Jelly Crimpers ! A BT engineer lent me a set, outdoor, waterproof, upto 8amps. No need to strip the wire, and permanant. Also a very small neat join. see these - I will only use terminal block as a temp fix from now on! Just brilliant. https://www.amazon.co.uk/PCSL-Professional-Jelly-Crimp-including/dp/B01NHEBF7L/ref=asc_df_B01NHEBF7L/?tag=googshopuk-21&linkCode=df0&hvadid=294741411242&hvpos=&hvnetw=g&hvrand=1512409380284079389&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9046786&hvtargid=pla-699056882079&psc=1 |