Fairy lights to ac08 controller - Printable Version +- Syncrolight Forum (https://www.syncrolight.co.uk/forum) +-- Forum: Light Shows (https://www.syncrolight.co.uk/forum/forumdisplay.php?fid=1) +--- Forum: General (https://www.syncrolight.co.uk/forum/forumdisplay.php?fid=2) +--- Thread: Fairy lights to ac08 controller (/showthread.php?tid=201) |
Fairy lights to ac08 controller - Allan - 04-12-2020 Hi, Newbie in this , but it have always been a dream of mine to start with Christmas lights . I bought the ac08 controller and wants to connect my fairy lights to this . How do I go about that ? - since I will need to connect the transformer to the controller . Hope someone can help , since I already blew up a few strings . Thank you RE: Fairy lights to ac08 controller - clivehawees - 10-12-2020 I dont have the AC08 but as I understand it, that controls the 230v! So, you would need to connect to a 3 pin extension that you then plug the transformer in to? You wont be able to fade the lights with that controller that way as I understand it, just turn them on and off. There also might be a delay due to the transformer. I used the 24 channel transformer and 5v string lights. |