Syncrolight Forum

Any suggestions for uv lamps that could be used with syncrolight DC controllers and software?

Just a special type of light bulb. Usually 240v so best on an AC08 controller. Should work fine.

Craig

(13-07-2022, 09:24 PM)Craig Wrote: [ -> ]Just a special type of light bulb. Usually 240v so best on an AC08 controller. Should work fine.

Craig

Nothing that will work on a DC08 controller?

If you can find a 12v or 24v DC bulb it would work. But ensure you use a regulated power supply to power controller and bulb.

Alternatively you could connect a relay to one of the outputs of the DC08, and use the relay to switch 240v to the bulb.

Craig