RS485 Booster / DMX Gateway / DMX Booster

£75.00
In Stock
Usually dispatched in 1-2 working days.
Quantity :

Product Details

Fully Isolated RS485 network booster and DMX Gateway. This controller has 3 different modes of operation: Mode 1 - Syncrolight Network Booster - Used to Isolate and/or boost a Syncrolight network. Useful for very long networks to ensure a good signal. Also fully isolates the networks, providing 2.75kV of galvanic isolation, and eliminates any ground loop issues between different power sources. Mode 2- DMX Booster - Used to Isolate and/or boost a DMX 512 network. Useful for very long networks to ensure a good signal. Also fully isolates the networks, providing 2.75kV of galvanic isolation, and eliminates any ground loop issues between different power sources. In this DMX to DMX mode, the controller may be used without any other Syncrolight controllers or software. Mode 3 - Syncrolight to DMX Gateway - Gives access to DMX equipment from a Syncrolight network. Provides access to all 512 DMX channels, and provides features like fading and flicker effects as per other Syncrolight controllers. Requires a 5v - 12v DC power supply (not included).

Features:

  • Fully isolated RS485 In and RS485 out ports.
  • 2.75kV of galvanic isolation.
  • Extends a Syncrolight or DMX network.
  • Pluggable screw terminals for data and power connections
  • Diagnostic LEDs for Transmit/Receive/Signal Ok and network faults.
  • Allows control of DMX equipment from a Syncrolight network.
  • 30kV ESD protection.
  • Built in termination resistor on both input and output ports (activated via a PCB jumper).
  • Eliminates ground loops, isolates the networks and helps ensure a clear data signal.
  • Built in stand-alone sequence which runs when no input signal (DMX Gateway and DMX Booster mode only).
  • Fully decodes and re-encodes data.

Specifications:

SpecificationValue
Product Id:CTRL-SB02
Power:5 to 12V DC
Ports:2 (RS485 In and RS485 out)
Approx Weight (KG):0.100