18-12-2016, 09:51 PM
Thanks for the reply Sandy,
I checked the Baud rates as you suggested (well, I tried each one on the left hand window as I can't access the controller) and also checked the baud rate of the COM port in Windows Device Manager but no luck. Another strange one is if I go to the Channel Control in Show Player, I can control the lights via the "Channel On/ All Channels On" buttons regardless of what the device number is set to, e.g. my controller was definitely set as Device 1, yet I can change the Device number in channel control to, say, 67 and it will still control the lights.
Regards
Pete
I checked the Baud rates as you suggested (well, I tried each one on the left hand window as I can't access the controller) and also checked the baud rate of the COM port in Windows Device Manager but no luck. Another strange one is if I go to the Channel Control in Show Player, I can control the lights via the "Channel On/ All Channels On" buttons regardless of what the device number is set to, e.g. my controller was definitely set as Device 1, yet I can change the Device number in channel control to, say, 67 and it will still control the lights.
Regards
Pete