Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ethernet controller
#4
The document shows the preset address of the Controller.

Your pc needs a different ip address. Like all networks each device on the network needs a unique address. Set your computer address to 192.168.168.100 ;so the same network range (I.E. First 3 numbers the same as the controller, 192.168.168.x) but a different 4th number, such as 100.
Subnet is the same 255.255.255.0
Default gateway is irrelevant here, but set the same to 192.168.168.1

Craig
Reply


Messages In This Thread
Ethernet controller - by paul_lindley@hotmail.com - 26-10-2022, 07:55 PM
RE: Ethernet controller - by ForumAdmin - 27-10-2022, 08:35 AM
RE: Ethernet controller - by Craig - 28-10-2022, 09:02 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)