24v dc relay - Printable Version +- Syncrolight Forum (https://www.syncrolight.co.uk/forum) +-- Forum: Light Shows (https://www.syncrolight.co.uk/forum/forumdisplay.php?fid=1) +--- Forum: General (https://www.syncrolight.co.uk/forum/forumdisplay.php?fid=2) +--- Thread: 24v dc relay (/showthread.php?tid=171) |
24v dc relay - r6sporty - 08-10-2020 [attachment=77] Hi, can anyone tell me if i can use an output channel on a DC controller to switch a 24VDC relay to bring on some 240v floods please?? Thanks RE: 24v dc relay - Craig - 08-10-2020 Yes you can. It was discussed previously on another thread https://www.syncrolight.co.uk/forum/showthread.php?tid=161&pid=628&highlight=Relay Also we now have a 3 channel relay controller available on the website https://www.syncrolight.co.uk/ProductDetails/CTRL-RL03.aspx Craig RE: 24v dc relay - r6sporty - 08-10-2020 great, thanks for that. don't suppose you have a picture of theĀ 3 channel relay controller do you?3 Channel Relay Controller RE: 24v dc relay - r6sporty - 09-10-2020 Craig, you spoke in the previous post about needing a diode.Do your relay controllers cOne with diodes or will I need to get these? Thanks RE: 24v dc relay - Craig - 10-10-2020 (09-10-2020, 07:27 AM)r6sporty Wrote: Craig, you spoke in the previous post about needing a diode.Do your relay controllers cOne with diodes or will I need to get these? Yes the Relay controller has flyback diodes installed on the PCB. The controller just needs a 12v DC power supply to power the PCB. Photos are on the website now. RE: 24v dc relay - Pauls - 12-10-2020 oh like the look of this new controller, will have to get this next year to replace mine that I made using a 3 channel dc controller and relays as per the previous thread. will give me another controller to use then for a RGB strip as well then. |